How to Re-Wax a Waxed Low-profile Logger Cap

By Filson - Better Outdoor Clothes & Gear | Published: 2026-10-26

Category: How-to Guides

Restore water resistance to your waxed cotton cap with this step-by-step guide. Learn the right wax, heat, and technique to keep your Filson cap performing.

Quick Answer

Re-wax your Filson Waxed Low-profile Logger Cap by cleaning it, applying wax evenly, and melting it in with gentle heat. This restores water resistance and extends the cap's life.

Why Re-Wax Your Cap?

Waxed cotton is durable and water-resistant, but the wax coating wears off over time with use and weather. Re-waxing your cap keeps it shedding rain and looking sharp.

The Waxed Low-profile Logger Cap uses heavy-duty waxed cotton, so it benefits from periodic re-waxing to maintain its protective finish.

What You'll Need

You'll need a wax bar or tin of wax specifically for waxed cotton, a soft cloth for applying, a hairdryer or heat gun on low, and a clean, well-ventilated workspace.

Avoid using household candles or paraffin wax, as they can stiffen the fabric and alter the cap's flexibility.

When to Re-Wax

Re-wax when water stops beading on the surface and starts soaking in. For a cap worn regularly in wet conditions, this might mean once a season; for occasional wear, once a year is often enough.

If the cap looks faded or dry, that's another sign it's time to re-wax.

Step-by-Step Re-Waxing Process

Clean the cap: Brush off loose dirt and spot-clean stains with a damp cloth. Let the cap dry completely before waxing. Checkpoint: Cap must be dry; wax won't adhere to moisture.
Apply wax evenly: Rub the wax bar in small circular motions over the entire outer surface, including the bill. Use a soft cloth to work it into the fabric. Checkpoint: Don't overapply; a thin, even layer is better than a thick one.
Melt the wax: Use a hairdryer on medium heat, holding it a few inches away, to melt the wax into the fabric. The fabric will darken as the wax absorbs. Checkpoint: Keep the heat moving; avoid overheating one spot to prevent scorching.
Let it cure: Hang the cap in a dry, room-temperature area for at least 24 hours. This lets the wax set and bond to the cotton fibers. Checkpoint: Don't wear the cap in rain until the wax has fully cured.

Product Spotlight

Waxed Low-profile Logger Cap: Made with heavy-duty waxed cotton for lasting service and water resistance. Regular re-waxing preserves this water resistance, keeping the cap functional in rain and snow.
Waxed Low-profile Logger Cap